1. Please read the CAUTION section carefully before starting.
2. Wearing rubber gloves, remove the plastic cap. Apply gel directly to the limescale by gently squeezing the tube to release the liquid through the brush
3. Use the brush to cover the limscale working it into corners.
4. Leave the gel to work for 10 minutes.
5. Wash away any remaining gel and rinse thoroughly
6. Wash away any remaining gel and rinse thoroughly
7. Reattach showerheads as necessary and store Oust Tap & Showerhead Descaler out of the reach of children.
8. Use regularly to maintain shiny looking taps and showerheads

1. Always use Oust Tap & Showerhead Descaler below eye lever to avoid the possibility of getting the solution in eyes. Remove showers from their support of disconnect and treat in the bath or shower tray.
2. Do not use on acid sensitive surfaces such as gold, silver, aluminium, copper, enamel, marble or limestone (be careful that the product doesn't come into contact with sinks or baths made of these surfaces).
3. Limescale can damage surfaces and this damage may be revealed when the limescale is removed; it will not have been caused by Oust.

Tap & Shower

Limescale can build up quickly on Taps & Showers because of regular use, making them look dirty and restricting the flow of water. Traditional surface limescale removers are not always effective at removing this scale as they simply run off. Oust Tap & Showerhead Descaler has been specifically designed to treat this problem, leaving your taps and showers sparkling clean with minimum effort. It's easy to apply straight from the tube, with the applicator brush. The thick gel clings to stubborn limscale and gently removes it leaving you with taps that look as good as new.

Instructions